Skip to main content

Service tool V3400 for resetting Canon printers counter

Service tool V3400 for resetting Canon printers counter
MAJ 11/06/17
The Service Tool V3400, and service tool V3600, allow you to reset the waste ink pad counter on some Canon printers: 

You can solve the messages errors "Waste Ink Tank Full" or "Waste Ink Pad Full", "error 5B00" or "Error P07" on these printers:
  • Canon Pixma iP2700, iP4800, iP4810, iP4840, iP4850, iP4900, iP4910, iP4940, iP4970, iP4980, iP4990, iP5810, iP5880
  • Canon Pixma MP230, MP240; MP250; MP260; MP270; MP280; MP480; MP490; MP540; MP550; MP560; MP620; MP630; MP640; MP980; MP990;
  • Canon Pixma IX6500, IX6510, IX7000
  • Canon Pixma IP3600, IP4940
  • Canon Pixma PRO9000, PRO9500
  • Canon Pixma MG2120. MG2140, MG2240, MG2250, MG2440, MG3240, MG3140, MG4100, MG4140, MG5140, MG5150, MG5240, MG5340, MG6140, MG6240, MG8140, MG8240 
  • Canon MX397, MX320, MX330, MX860 
  • etc

Where can you download the Service Tool V3400 ?

It is free here:
  • ST V3400. (but check first for no virus or trojan)

There is too a paid version here:

How using the Service Tool V3400 ?

1- Dowload and install the Service Tool Canon V3400
2- Enter in maintenance mode with the printer:
- Power off the printer
- Connect the printer to the central unit with an usb cable
- Hold on the "Resume" button (triangle in a circle) et press "Power"
- Hold on these two buttons until the led power lights.
-  Release the "Resume" button, but not the power button, and press 5 times "Resume".
- Release the two buttons. Leds will flash, wait until it stops. Now you are in Maintenance Mode
3- Run the Service Tool V3400
4- Choose the right USB port in "USB PORT"
5- In the section "Ink Absorber Counter", choose "Main
6- In the section "Counter Value" (%) choose the number the closest of the counter number and clik on "SET" (The counter number is in the section "EEPROM")


Troubleshooting:

Comments

thanks for your post about resetting Canon printers counter
Hello Guys,

I have tried this four times and it did not work.

If i want to set the Ink Absorber Counter to zero or ten percent, error 002 appears.

Can you give me some advice how to fix this sh**?

Thanks in advance!
By the way.....what does error 009 stands for??
Jann Lassalle said…
Hi Christophe,

For error 002, try this:
Power of the printer
Plug the USB cable into another USB port on the computer
Execute again the Service Tool V3400

For error 009, it's possible that a cartridge is empty or baldy installed.
Hello,

I try it for a canon MG5700 but it display error code 006
Jann Lassalle said…
Hi Dzouline Rakotonirina,

Try this:
http://fix-your-printer.blogspot.com/2016/06/how-to-solve-error-code-006-with-canon.html
kris salvador said…
Anyone who have resetter for canon G1000?
Anonymous said…
Can I use it for my Pro-1 ?
Jann Lassalle said…
Hi,
I'm not sure it works for Canon Pixma Pro-1....
Suhail said…
Please post link for Service toll of canon mp280 only. please i have downloaded so many plz
Jann Lassalle said…
Hi Suhail,

Here is my email adress in this post:
http://imprimante-en-question.blogspot.fr/p/blog-page_3.html

Contact me and i will send you the service tool.
Tim B said…
Followed the instructions for my MG5650. I'm left with the yellow warning triangle light on, and the service tool runs but nothing is enabled, as if it can't find the printer. The only lights on this model are one inside the power button and the warning triangle below the reset button.
Any ideas?
Jann Lassalle said…
Hi Tim,

Try this:
http://fix-your-printer.blogspot.com/2017/01/service-tool-v3400-inactive.html
joshy joseph said…
I am using mg2570. While switch on printer it's sensing by the service tool and become bright.but when printer set to service mode, service tool turned to dim and unable to select functions. Same time ppin printer yellow led will glow after 5th press.if it is 6th long press green power led will glow. In both cases service tool not working. Please help me to solve problem.consider urgent
Jann Lassalle said…
Hy Joshy,

See here:
http://fix-your-printer.blogspot.fr/2017/01/service-tool-v3400-inactive.html
kudzaishe dube said…
How do install the tool
Jessica Ridley said…
This comment has been removed by the author.
Gary Yang said…
Hi Joshy,

do you have the service tool for canon pixma e460?
jane ann ramos said…
what should I do if the cartridge is empty? error 009 always appear.. help me please
Jann Lassalle said…
If the cartridge is emptu, you need to replace it by a full one.
SWELOA said…
I have the same problem with error 009. I get it whatever I try to do except when reading the EEPROM, that works. I had a empty cartridge but I have changed that and it still shows the same fault. Is there a hardware reset that can be done
Anonymous said…
Hello, someone could help me reset my Canon TS5040 Printer. thanks in advance

Popular posts from this blog

How to fix error B200 on canon Printers

MAJ11/06/17
Error B200 means the printhead voltage or temperature is not normal. The Printhead could be defective.... but first, try these solutions below:


Solution 1:
Disconnect the power cable from the printer.Wait 1 hour.Connect the power cable
Solution 2:
Check and Clean Head contact pin condition of the carriage unitCheck Cable connection especially the carriage FFC
Solution 3:
Turn off the power Open the panel Turn on the power Wait for print carriage to start moving to the left.Let it go past half way Before print carriage reaches left hand side shut the cover. Leave the Printer turned on
Solution 4:
Unplug the power cable.Open the printerPush the whole print head mechanic to the centerWhile the printer still open, plug the power and turn it ON. When the printhead still moving and is going to the very LEFT, close the cover. Wait until its boot up. 
Solution 4a:
Take out all of the ink cartridgesLift up the grey bar by where the ink goesLeft the print head in the middle of the pr…

Solving error code 2,140,21 or 2140,21 on Canon printers

MAJ 11/06/17
Error 2,140,21 or 2,157,50 appears on Canon printers when the scanner is used.
"Printer is in use or an error has occurred. Check status. Scanner driver will be closed. Code : 2,140,21"

Solution 1:
On Windows: go to "devices"Click on "Printer"Click on "Stop printing".
Solution 2:
Reinstate the driver of the printer.
Solution 3:
Turn off the firewall
Solution 4:
Sometimes, replacing the cartridge could solve the problem.